Wheelchair-accessible shower system that reduces the burden
on the caregiver and achieves secure and comfortable bathing
Achieves high heat retention even taking a shower
Heat retention due to high degree of airtightness
Reducing the burden on the caregiver
Easy-to-operate
The simple panel design allows easy operation. The bathing time can be set with the single press of a button, allowing caregivers to easily perform bath settings that match each individual bather.
Ultra fine bubbles
The shower uses ultra fine bubbles which not only perform cleaning but also provide full-body warmth as well as moisturize the skin.
*The ultra fine bubble function uses a product from SHIBATA CO.,LTD.
Buttocks cleaning shower
A shower head is arranged to reach even hard-to-wash locations, supporting bathing care.
Disinfectant Button
Disinfection using a chemical solution can be done witha single switch.
Just press the switch to spray a shower containing a chemical solution. Rinsing is also performed automatically.Sanitary with easy cleaning
The spacious gap between the bathtub and the floor also makes it easier to clean.
Significantly reduces the amount of hot water for bathing
*Compared to the Tutti (HK-8100). *The actual amount of hot water used varies depending on the bathing time and physique of the user.
The amount of hot water used when bathing with the Automatic Course (3 min.) can be reduced compared to the tank-type sitting bathtub. This not only reduces the burden of bathing care but also in terms of running cost.
Automatic Course (3 min. / 5 min.)
The body wash can be done automatically by pressing a single button, significantly reducing the burden of caregiving.
The product also features a “shower course (1 to 10 min.)” where only hot water is sprayed.
Bathing wheelchair with innovative and meticulous design to support safety and peace of mind
An ergonomic Balanced tilt mechanism allowing for reclining with little force required
Our unique Balanced tilt mechanism requires very little strength to recline the chair. Even female caregivers can easily operate the chair alone, regardless of the bather’s weight.
Safety belts providing a high level of support
Safety belts are provided for the waist and chest regions as standard equipment. An optional safety belt for the leg region can be added for greater safety.
Moving side guards for easy transfer
The moving side guards allow the caregiver to bring the bathing wheelchair closer to the bather’s usual wheelchair for easier transfer. The large side guards also provide protection to above the bather’s knees for added safety.A retractable leg rest supporting standing and transferring
The leg rest can be completely stored underneath the seat. This creates space at the feet to support safer movement. This makes it easier for the bather to pull in their heels and stand independently.
Thorough cleaning, easy cleaning
The wheelchair pad and headrest can easily be removed.
It is easy to wash the rear surface, which is often an area of concern, allowing you to keep the entire product sanitary.
The seat can be removed, allowing you to thoroughly clean the posterior region, where cleanliness is of particular concern.
Supports two types of bath systems
Sereno Chair in HK-3800-S
| Sales name | Sereno Chair in |
|---|---|
| Power supply | Single phase, AC 220 to 240V（50 / 60Hz） |
| Power input | 500 VA |
| Power consumption | 300 W (50 / 60Hz) |
| External dimensions | 1480(L) x 950(W) x 1140(H) mm |
| Weight | 87 kg |
| Shower flow rate | 14 L/min |
*HK-3800-S includes the bathing wheelchair (RA-8100).
Reference:
SHIBATA CO., LTD. Ultra Fine Bubble Measurement Data Average particle diameter of approx. 126 nm when at 0.2 Mpa, approx. 44 million bubbles per cc Measuring device: Shimadzu Corporation, SALD-7500nano (laser diffraction / scattering method)
*The data listed above indicates values for the Ultra Fine Bubble System of SHIBATA CO., LTD.
Made in Japan
Auxiliary functions
- Automatic body washing function
- Automatic device disinfectant function
- Shower only discharge function
- Hand shower only discharge function
- Elapsed time display/alert function
- One hand shower ×1
- Alert tone
Standard accessories
| Reservoir Bottle | HK3100-011 | 1 |
|---|---|---|
| Neck Curtain | HK3800-001 | 1 |
| Bathtub Cover | HK3800-004 | 1 |
| Suction Hook | HK3800-005 | 1 |
Accessories (sold separately)
Reservoir Bottle
HK3100-011 1 piece
Shower head
HK255-012 1 piece
Neck Curtain
HK3800-001 1 piece
Bathtub Cover
HK3800-004 1 piece
Suction Hook
HK3800-005 1 piece
A space-saving design allows for installation in a 3 x 3.5 m bathroom
The compact body has a width of 950 mm and a depth of 1480 mm. As it can be installed even in bathrooms that are 3 x 3.5 m, it is perfect for small-scale facilities.
Bathing wheelchair RA-8100
| External dimensions | 1220(L) x 740(W) x 1280(H) mm (when transporting) 760(L) x 740(W) x 1280(H) mm (when transferring) 1380(L) x 740(W) x 1130(H) mm (when bathing) |
|---|---|
| Weight | 47 kg |
| Back angle | 60° (when bathing) / 81° (when transporting) |
| Casters | Front wheels: Φ 100 mm (with brake), Rear wheels: Φ 125 mm (with brake) |
| Safety functions | Safety belts (Waist and chest regions) |
| Bather’s height range | 140 to 180 cm |
| Bather’s weight range | 100 kg or less |
Made in Japan
Auxiliary functions
- Balanced tilt mechanism
- Antimicrobial mat
- Sliding headrest
- One-touch retractable leg rest
- Antimicrobial pad
- Antimicrobial headrest
- Moving side guards
Standard accessories
| Wheelchair Pad | RA8100-003 | 1 |
|---|---|---|
| Heel Pad | RA8250-005 | 1 |
| Waist Belt | RA825-001 | 1 |
| Chest Belt | RA825-009 | 1 |
| Belt Pad | RA355-015 | 2 |
| Headrest | RA355-014 | 1 |
| Pad Fastener Stud | RA355-009 | 19 |
| Pad Fastener Socket | RA825-008 | 19 |
| Pad Fastener Remover | RA735-001 | 1 |
Accessories (sold separately)
Wheelchair Pad
RA8100-003 1 piece
Heel Pad
RA8250-005 1 piece
Waist Belt
RA825-001 1 piece
Chest Belt
RA825-009 1 piece
Belt Pad
RA355-015 1 piece
Headrest
RA355-014 1 piece
Pad Fastener Stud
RA355-009 1 piece
Pad Fastener Socket
RA825-008 1 piece
Pad Fastener Remover
RA735-001 1 piece
Side Release Buckle
IB50SA-BK 1 piece
Option
Leg Belt
RA825-002 1 set
Installation Diagram
Installation conditions
Installation works
| Hot water supply | 20 A, stopped by a water shutoff valve. Raised 100 mm from the floor. |
|---|---|
| Hot water / water supply pressure | 150 to 300 kPa |
| Hot water / water flow | At least 30 L/min for each |
| Hot water temperature | 60 to 70°C (endpoint temperature) |
Electrical works
| Power supply |
|
|---|---|
| PF piping |
|
Construction works
| Floor gradient | Form an identical floor gradient of 1:100 or less across the area marked with  . (Dimensions marked by ☆) |
|---|---|
| Drainage capacity | Use a trap or some other form of odor prevention, and ensure a drainage capacity of at least 100 L/min. |
| Drain | Drainage pit (groove depth of at least 200 mm). Install the drain hole in the groove. |
| Boiler capacity | 90,000 kcal/h or more. (Additional consultation is required when using an electric water heater as specifications will vary depending on the number of baths taken.) |
- Specifications and appearance are subject to change for improvement without notification.
- The content of this catalog is current as of October, 2024.
